"display control module"
9 Draht-serielle Schnittstelle des Stellen-alphanumerischer Leuchtstoff Anzeigen-Modul-9MS09SS1 2
9 digits Alphanumeric Vacuum Fluorescent Display(VFD) module 9MS09SS1 Features: Simple connection to the host system data bus via two-wired serial interface 14 segments alphamumeric & decimal point, 9 digits Since a DC/DC converter is used, only +5VDC power source is required to operate the module One chip controller offers integral 64×16 bit programmable logic array, low power consumption and high reliability in services 32 brightness levels can be selected by brightness
160x32 punktiert VFD bitparallele M68 LCD kompatible Schnittstelle des grafische Anzeigen-Modul-160S321B1 8
Graphic Fluorescent Display(VFD) module 160S321B1 Features: 160×32 dot graphic. 8 bit parallel M68 LCD compatible & asynchronous serial interface (9600, 19200 bps). Since a DC/DC converter is used, only +5VDC power source is required to operate the module. CG-ROM which is mounted on module offers 6×8 dot and 11×16 dot font. 4 brightness levels can be selected by brightness control command. Chip in grass(CIG) driver VFD panel technology Application: Scales, ECR, POS, ATM,
Punktematrix-Anzeigen-Modul 5V 16T202DA1E VFD sondern kompatible Schnittstelle Stromversorgung LCD aus
Dot matrix Vacuum Fluorescent Display(VFD) module 16 characters 2 lines 16T202DA1E Features: LCD Compatible: drop-in-replacement (same interface and mechanical dimension as LCD module) Readable display: 5*7 dot matrix type Vacuum Fluorescent Display Compact and lightweight: flat panel (VFD) and surface mount technology 5V single power supply Brightness level: adjustable into 4 levels (25%, 50%, 75% and 100%) by software command Support CG-RAM fonts and CG-ROM: 8 user
700 CDluminance große VFD Charaktere des Anzeigen-Modul-16T202DA1J 16 2 Linien
Dot matrix Vacuum Fluorescent Display(VFD) module 16 characters 2 lines 16T202DA1J Features: LCD Compatible: drop-in-replacement (same interface and mechanical dimension as LCD module) Readable display: 5*7 dot matrix type Vacuum Fluorescent Display Compact and lightweight: flat panel (VFD) and surface mount technology 5V single power supply Brightness level: adjustable into 4 levels (25%, 50%, 75% and 100%) by software command Support CG-RAM fonts and CG-ROM: 8 user
LCD kompatible VFD Niveau-Helligkeit des Punktematrix-Anzeigen-Modul-20T202DA1E 4
Dot matrix Vacuum Fluorescent Display(VFD) module 20 characters 2 lines 20T202DA1E Features: LCD Compatible: drop-in-replacement (same interface and mechanical dimension as LCD module) Readable display: 5*7 dot matrix type Vacuum Fluorescent Display Compact and lightweight: flat panel (VFD) and surface mount technology 5V single power supply Brightness level: adjustable into 4 levels (25%, 50%, 75% and 100%) by software command Support CG-RAM fonts and CG-ROM: 8 user
Einfache der Schnittstellen-VFD Charaktere Punktematrix-Anzeigen-des Modul-40 2 Linien 40T202DA1J
dot matrix Vacuum Fluorescent Display(VFD) module 40 characters 2 lines 40T202DA1J Features: LCD Compatible: drop-in-replacement (same interface and mechanical dimension as LCD module) Readable display: 5*7 dot matrix type Vacuum Fluorescent Display Compact and lightweight: flat panel (VFD) and surface mount technology 5V single power supply Brightness level: adjustable into 4 levels (25%, 50%, 75% and 100%) by software command Support CG-RAM fonts and CG-ROM: 8 user
40 Charaktere 2 Linien VFD-Punktematrix-Anzeigen-Modul 40T202DA1E selbstleuchtend
dot matrix Vacuum Fluorescent Display(VFD) module 40 characters 2 lines 40T202DA1E Features: LCD Compatible: drop-in-replacement (same interface and mechanical dimension as LCD module) Readable display: 5*7 dot matrix type Vacuum Fluorescent Display Compact and lightweight: flat panel (VFD) and surface mount technology 5V single power supply Brightness level: adjustable into 4 levels (25%, 50%, 75% and 100%) by software command Support CG-RAM fonts and CG-ROM: 8 user
Charaktere des hohe Helligkeits-Vakuumleuchtstoff Anzeigen-Fahrer-20 2 Linien 20T202DA1J
Dot matrix Vacuum Fluorescent Display(VFD) module 20 characters 2 lines 20T202DA1J Features: LCD Compatible: drop-in-replacement (same interface and mechanical dimension as LCD module) Readable display: 5*7 dot matrix type Vacuum Fluorescent Display Compact and lightweight: flat panel (VFD) and surface mount technology 5V single power supply Brightness level: adjustable into 4 levels (25%, 50%, 75% and 100%) by software command Support CG-RAM fonts and CG-ROM: 8 user
VFD Oven Control Board Display 700CD führte Vakuumleuchtstoffanzeigefeld
Oven control board display panel HNM-11LM13 (compatible with 11-LT-43GK, HL-D1621) Vacuum Fluorescent Display(VFD) Panel size: 135.2*40 mm Display area: 106*25 mm Below parts also can be developed if customer can provide datasheet or sample 2-LT-23GK 7-LT-103G 7-LT-77G 7-LT-89G 6-MT-327GK 8-MT-140GK 12-LT-13GK Panel Size: 135.2*40 MM Display Area: 106*25 MM Color: Green, Red Luminance:: 700 CD Operating Temperature: -20 ~ 70 ℃ Storage Temperature: -40 ~ 85 ℃ Model: 2-LT-23GK
Selbstleuchtendes Hintergrundbeleuchtungs-Modul des Weiß-LED, LED-Anzeigen-Hintergrundbeleuchtung KEIN B001
LED display Component Features: LED Display Component: Self Luminous, High Quality and Readable Display,according to customers requirements. +3VDC Single Power Supply:Energy saving,Installed 20,000 hours of guarantee. Life span:20000~100000hours 5 Brightness Levels: 10% ~ 100% OR according to customers requirements. Character Format: According to customers requirements. Application: Electric cars OR Electric bicycle Packaging and delivery: according to customers requirements.
Selbstleuchtende Vakuumanzeige, breiter Betrachtungs-Winkel des Punktematrix-Anzeigen-Modul-20T201DA2
VFD dot matrix Display module 20 characters 2 lines 20T201DA2 Features: The MCU can control this module by synchronous serial input interface. Since a DC/DC converter is used, only +5V power source is required to operate the module. One chip controller mounted on the module includes the character generator ROM (CG-ROM) of ASCII, European and Japanese Katakana characters. Continuous brightness level can be selected by dimming function. Characters are provided with a 5x7 dot
Anzeigen-Modul 140T322A1 140x32 Dots Vacuum Fluorescent Display Module RS232 VFD
VFD Graphic Display module 140x32 dots 140T322A1 Features: Simple connection to the host system. Either parallel or RS-232 Serial interface can be selected. In case of RS-232 serial interface, it is possible to choose 9600, 19200, 28800 or 38400 bps. Since a DC/DC converter is used. Only 5VDC power source is required to operate the module. CG-ROM which is mounted on module offers PC437, PC850, KSC-5601 and GB-2312. Blue-green(505nm) vacuum fluorescent display provides an
